BDS 8" 4-LINK LIFT KIT WITH NX2 SHOCKS | 19-24 RAM 2500 4WD DIESEL W/O AIR RIDE | (REQUIRES AFTERMARKET FRONT DRIVESHAFT)
Heavy duty 4-link arms improve strength, handling and caster control.
High strength progressive rate coil springs for a great ride on any terrain.
Track bar relocation brackets to re-position axle.
Forged drop pitman arm to correct steering angles.
Front sway bar correction to maintain handling performance.
HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts.
Important Note: Does not fit air-ride models. This kit requires the use of an aftermarket front driveshaft (not provided) in addition to the (provided) indexing ring kit - BDS-122624 (6-bolt). Both must be installed, however due to variations between truck configurations we recommend installing the kit prior to taking measurements for the aftermarket front driveshaft to ensure correct length. Vehicle can be driven without front driveshaft. Kit was tested with a Drive Line Plus flange and driveshaft, however other high angle driveshaft options can be used.
