BDS 6" LIFT KIT WITH FOX 2.0 PERFORMANCE SERIES COILOVERS AND SHOCKS WITH 2" COIL SPACERS | 09-11 RAM 1500 4WD
High clearance crossmember design maximizes ground clearance
Robust steering knuckles maintain ESC system compliance
HD skid plate system improved offroad protection
Multipoint differential relocation brackets to secure the front axle and improve CV angles
Factory Protection Plus drivetrain warranty included
Important Note: The Rack and Pinion steering system is extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy. Not recommended for AWD models. Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with a factory tire. Will not fit adjustable air suspension equipped models. This kit will bolt on Eco-Diesel models but it will require an aftermarket front drive shaft. TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system. This kit is FMVSS No.126 Compliant.
Share
Fits these vehicles
2 vehicles listed by the manufacturer for this part.
Always confirm the fit for your exact trim before ordering — ask us if you are unsure.
