BDS 6" LIFT KIT WITH 5" REAR COILS WITH NX2 SHOCKS | 2012 RAM 1500 4WD
High clearance crossmember design maximizes ground clearance.
Robust steering knuckles maintain ESC system compliance.
HD skid plate system improved offroad protection.
Multipoint differential relocation brackets to secure the front axle and improve CV angles.
BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance.
Factory Protection Plus drivetrain warranty included.
Important Note: These trucks vary from 1"-3" tail high from the factory. Be sure to measure your vehicle before ordering. The BDS-022209, BDS-022309, and BDS-022509 can all be substituted to achieve the desired stance. The Rack and Pinion steering system is extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy. Not recommended for AWD models. Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with a factory tire. TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for 5" of lift or replace the TRX struts with standard struts for use with this system. Will not fit adjustable air suspensio
Share
Fits these vehicles
1 vehicle listed by the manufacturer for this part.
Always confirm the fit for your exact trim before ordering — ask us if you are unsure.
