6" LIFT KIT W/ 5" LIFT COILS 13-18 RAM 1500/19-24 CLASSIC

BDS 6" LIFT KIT WITH 5" REAR LIFT COILS WITH FOX 2.0 SHOCKS | 13-18 RAM 1500/19-24 CLASSIC

• High clearance crossmember design maximizes ground clearance.
• Robust steering knuckles maintain ESC system compliance.
• HD skid plate system improved offroad protection.
• Multipoint differential relocation brackets to secure the front axle and improve CV angles.
• BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance.
• Factory Protection Plus drivetrain warranty included.

Important Note: The Rack and Pinion steering system is extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy. Not recommended for AWD models. Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with a factory tire. Will not fit adjustable air suspension equipped models. This kit will bolt on Eco-Diesel models but it will require an aftermarket front drive shaft. TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system. This kit is FMVSS No.126 Compliant.