5" RADIUS ARM LIFT KIT FOX 2.0 SHOCKS 23-26 F-350 S/DUTY 4WD DRW DIESELBDS2261FS

BDS 5" RADIUS ARM LIFT KIT FOX 2.0 SHOCKS | 23-26 F-350 SUPER DUTY 4WD DUAL REAR WHEEL DIESEL

• Easy, 100% Bolt-on installation.
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain.
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance.
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling.
• Fabricated steel blocks provide level stance from front to rear.
• Factory Protection Plus drivetrain warranty included.

Important Note: Fits dual rear wheel F-350's. Ford recommends the replacement of the pitman arm nut after each time it has been removed. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS-123402. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups. Installation requires a torque wrench capable of 406 ft-lbs. Vehicles with radius arm mounted ride height sensors will require BDS-123303.