5.5" LIFT KIT W/ FOX 2.0 SHOCKS & 5" REAR BLOCKS 13-18 RAM 3500 4WD GAS

BDS 5.5" LIFT KIT WITH FOX 2.0 SHOCKS AND 5" REAR BLOCKS | 13-18 RAM 3500 4WD GAS WITH 6-BOLT TRANSFER CASE

• Heavy duty radius arm drop brackets maintain proper suspension geometry.
• Front high strength progressive rate coil springs for a great ride on any terrain.
• Front track bar relocation bracket to re-position axle.
• Forged drop pitman arm to correct steering angles.
• Front sway bar correction to maintain handling performance.
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts.
• BDS FOX performance series IFP gas shocks to improved ride and offroad performance.

Important Note: 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft. The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft. Some vehicles may require a rear driveshaft spacer kit BDS-122007 to maintain adequate rear driveshaft engagement. DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits.