BDS 4" RADIUS ARM LIFT KIT WITH FOX 2.0 SHOCKS AND 2" REAR BLOCKS | 19-24 RAM 3500 4WD GAS WITHOUT FACTORY REAR OVERLOADS LEAFS WITH 6-BOLT TRANSFER CASE INDEXING RING
Heavy duty tubular radius arms improve strength, handling and caster control.
Front high strength progressive rate coil springs for a great ride on any terrain.
Front track bar relocation bracket to re-position axle.
Forged drop pitman arm to correct steering angles.
Front sway bar correction to maintain handling performance.
HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts.
Kit contains 2" rear blocks.
Important Note: Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop. Vehicles equipped with a Manual T-case, requires BDS-122422 Manual transfer case shifter extension. Vehicles equipped with a 2-piece rear drive shaft (carrier bearing), require BDS-122406 Carrier bearing drop.
