4" LIFT KIT W/ NX2 SHOCKS 25-26 RAM 1500 W/ AIR RIDE W/ OE 22" WHEELSBDS2123H

BDS 4" LIFT KIT WITH NX2 SHOCKS | 25-26 RAM 1500 WITH AIR RIDE WITHOUT FACTORY 22" WHEELS

• High clearance crossmember design maximizes ground clearance.
• Robust steering knuckles maintain ESC system compliance.
• HD skid plate system improved offroad protection.
• Multipoint differential relocation brackets to secure the front axle and improve CV angles.
• FOX performance series IFP gas rear shocks to improved ride and offroad performance.
• Factory Protection Plus drivetrain warranty included.

Important Note: Fits models with 3.0L Hurricane I6, 3.6L V6, and 5.7L V8 engines. Extreme care/caution must be taken to follow the steps of these instructions to prevent any air leaks or damage to the bags during installation. The factory air ride is a closed-loop system. Opening the system more times than recommended in the lift instructions will require the system to be recharged (this can be done at any RAM dealer service department). A scan tool is needed to access the air control module to perform the service. Frame bracket modification is required. Fits 4WD models equipped with factory air ride only. Stock 18" wheels cannot be reinstalled due to steering interference. Stock 20"+ wheels can be reinstalled with factory-size tires. Trucks equipped with factory 22" wheels must use the large bore steering knuckles. Does NOT fit Diesel Models. Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P or