BDS 3" RADIUS ARM LIFT KIT WITH FOX 2.5 FRONT AND REAR SHOCKS | 20-22 SUPER DUTY 4WD DIESEL
Easy, 100% Bolt-on installation.
Pro-Ride dual rate coil springs ride smooth through any terrain.
Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance.
Adjustable solid steel track bar designed to recenter the front axle.
Fabricated steel blocks provide level stance from front to rear.
Important Note: Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height). Larger tires on stock wheels are not recommended due to the brake line clearance required. Installation requires a torque wrench capable of 405 ft-lbs. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift. Trucks without top-mounted overload springs require (x4) BDS-UBT4031 available to purchase separately. Fits SRW models only.
Share
Fits these vehicles
2 vehicles listed by the manufacturer for this part.
Always confirm the fit for your exact trim before ordering — ask us if you are unsure.
