BDS 1-2" LEVELING KIT WITH FOX 2.0 SHOCKS | 17-19 SUPER DUTY (1" LIFT) /20-26 SUPER DUTY (2" LIFT)
Easy, 100% Bolt-on installation.
Pro-Ride dual rate coil springs ride smooth through any terrain.
Heavy duty track bar relocation bracket designed to recenter the front axle.
Important Note: 2017-2019 models net 1" of lift height; requires an additional 1" coil spring spacer to sit level. 2020-2026 models net 2". Kit designed for diesel models; Gas models will achieve approx. 1/2" more ride height. 2024+ Ford Super Duty Only: This kit includes ball joint cams to achieve optimum performance both on and off-road. For vehicles equipped with non-selectable passenger side hub-lock on the front axle along with these ball joint cams, it is required to replace the non-selectable with a selectable hub-lock. Part number (PC3Z-3B396-A) is needed to prevent a grinding noise from the front axle for these applications. If your vehicle is not factory equipped with them, you may also need vacuum lines (3C125-A and/or 3C124). You can reference Section 307-07A of the Workshop Manual or Bulletin SSM 52423 for more information. See installation instructions for additional Information. Vehicles with radius arm mounted ride height sensors will require BDS
Share
Fits these vehicles
2 vehicles listed by the manufacturer for this part.
Always confirm the fit for your exact trim before ordering — ask us if you are unsure.
